02/11/2010: Single Leg Jumper's Toolbox: Part 1, 2, & 3
By: Andrew Darqui
INTROEver so often, the topic of increasing single leg running vertical jumping (SLRVJ) ability comes up. The advice given by others seems to lean towards plyometric dominated routines, with less emphasis given to weightlifting. To me, this overemphasis on "plyometric" training is just the typical useless strength & conditioning regurgitation. On the same note, if I see another person recommend smolov or starting strength to someone who wants to improve single leg jumping, my brain is going to implode.
In this 3-part article, I will provide a framework for improving single leg running vertical jump. In part 1, I'm just going to outline what exercises are important depending on your experience level. Part 2 will provide general details on each exercise. Part 3 will provide various routines & training ideologies.
Stay tuned for part 4, because I will provide actual templates for those who have problems following this huge article. However, there should be no problem following this article.
The templates will include general program layouts for beginner/intermediate/and advanced athletes.
Show-N-Improve: Eddie flying
PART 1: OVERVIEWSLRVJ performance gains depend on a few things:- Improving efficiency with SLRVJ itself
- Improving muscular strength in the ankles, calves, quads, glutes, and hamstrings
- Improving the ability to overload various movements that transfer to SLRVJ (for example: bounds or heavy stepups)
- Improving core strength, especially with stabilization exercises (core plank variations)
- Improving arm swing by increasing shoulder power
- Improving body composition
- Experiencing the most significant gains in periods of high intensity and low volume training (re: peaking @ this blog entry)
Want SLRVJ, but can't bound? Master it.
Training for single leg jumping depends on a few things:SLRVJ Movement Efficiency:
- Poor (LEVEL-1)
- Good (LEVEL-2)
- Advanced (LEVEL-3)
Weight Training Experience Level:
- Beginner
- Intermediate
- Advanced
As usual in performance enhancement, training will depend on which categories you fall into.
PART 1(A): SLRVJ Movement EfficiencyMovement efficiency refers to how coordinated a movement is, particularly SLRVJ in this case. Explosive/reactive training will be guided depending on the level of movement efficiency. For example, performing truly plyometric movements with poor movement efficiency is risky and ineffective.
Judging SLRVJ movement efficiency is more of a "does it look good" approach. Bounding tests & SLRVJ jump height could be used to place an individual into a certain category, but this can fail in the case where someone has great movement efficiency yet lacks a decent amount of strength (basketball player example). So for that reason, I will use other observations to categorize SLRVJ movement efficiency.
Poor (LEVEL-1)- Little to no experience with SLRVJ's
- Joints collapsing during plant & takeoff, for example; ankle, knee, or hip collapse
- Plant, arm swing, and takeoff do not look fluid (one motion)
- Unable to accelerate aggressively into a 3-step jump, without getting too much horizontal displacement. Jump angle <= 60-65 degrees.
Good (LEVEL-2)- Moderate to great experience with SLRVJ's
- No obvious collapsing at the joints during plant & takeoff
- Plant, arm swing, and takeoff look fluid
- Able to accelerate aggressively into a 3-step jump, without getting too much horizontal displacement. Jump angle > 60-65 degrees.
- Unable to accelerate aggressively into a 5-step jump, without getting too much horizontal displacement. Jump angle <= 60-65 degrees.
- Unable to proficiently perform single leg bounding
Advanced (LEVEL-3)- Great experience with SLRVJ's
- No obvious collapsing at the joints during plant & takeoff
- Plant, arm swing, and take off are very fluid
- Able to accelerate aggressively into a 5-step jump, without getting too much horizontal displacement. Jump angle > 60-65 degrees.
- Proficiency in single leg bounding
Now that you know where you stand movement-efficiency wise, you don't have to spend your time with exercises that are too far above or below your experience level.
Explosive exercises for SLRVJ based on movement efficiency level
Explosive exercises for LEVEL-1
- Should not perform exercises in the LEVEL-2 or LEVEL-3 brackets before progressing properly.
- Athletes in this bracket should ONLY do these exercises.
PRIMARY EXERCISES:
- Single leg running vertical jumps should make up the majority of your explosive training
- SLRVJ's from 1 step, 2 step, 3 step, and 'normal' (how you normally do them). Emphasizing 60-65 degree takeoff angle (vertical emphasis).
SECONDARY EXERCISES:
ASSISTANCE EXERCISES:
- [Force absorption]: Paused quick lunges
- [Force absorption]: Paused single leg lateral jumps
- [Reactivity]: Quick lunges
ANKLE ASSISTANCE EXERCISES:
- [Reactivity]: Double leg RFI line hops (lateral, linear)
- [Reactivity]: Double leg lateral barrier jumps (rebounding). An imaginary barrier could be used. Optimally, the barrier would be a hurdle with a rope on top. Boxes or actual hurdles can lead to injury.
Explosive exercises for LEVEL-2
- Athletes in this bracket can perform exercises / progressions from the LEVEL-1 bracket, but should not perform LEVEL-3 exercises without proper progression.
- Bounding should be progressed slowly, over a period of months in most cases, emphasizing knee drive and a cyclic motion of the heel under the butt in a sprint-like motion. If you aren't experienced with bounding, it's essential to start off slow and work on proper arm drive / hip drive / leg turnover. Hurdles with ropes are one of the best tools for teaching single leg bounding, as you are forced to drive the hip up and cycle the leg over the rope.
PRIMARY EXERCISES:
- SLRVJ's from 5 steps and normal. Emphasizing 60-65 degree takeoff angle (vertical emphasis).
SECONDARY EXERCISES:
- [Force absorption + Reactivity]: Alternate leg bounding progression (LRLR...).
- [Force absorption + Reactivity]: Single leg bounding progression (LLRR, LLLRRR, LLLL..., RRRRR...)
ASSISTANCE EXERCISES:
- [Force absorption]: Vertical Jump to split squat landings
- [Reactivity]: Weighted quick lunges
- [Explosive strength]: Single leg box jumps / hurdle jumps (single response)
ANKLE ASSISTANCE EXERCISES:
- [Reactivity]: Single leg RFI line hops (lateral, linear, multi-directional)
- [Reactivity]: Weighted single leg RFI line hops (lateral, linear, multi-directional)
- [Reactivity]: LOW-ROPE Single leg lateral barrier jumps (rebounding). An Imaginary barrier could be used. Optimally, the barrier would be a hurdle with a rope on top. Boxes or actual hurdles can lead to injury.
Explosive exercises for LEVEL-3
- Athletes in this bracket can do any exercise (LEVEL-1, LEVEL-2 & LEVEL-3 brackets).
PRIMARY EXERCISES:
- SLRVJ's from 5 steps and normal. Emphasizing 60-65 degree takeoff angle (vertical emphasis).
SECONDARY EXERCISES:
- [Force absorption + Reactivity]: Max effort alternate leg bounds (LRLR...)
- [Force absorption + Reactivity]: Max effort single leg bounds (LLRR, LLLRRR, LLL...., RRRRR...)
- [Force absorption + Reactivity]: Max effort weighted single leg bounds
ASSISTANCE EXERCISES:
- [Force absorption]: ADA split squat landings
- [Force absorption + Reactivity]: Single leg box jumps (multi response)
- [Explosive strength]: Explosive weighted rebounding lunge jumps
- [Reactivity]: Single leg lateral barrier jumps (rebounding). An imaginary barrier can be used. Optimally, the barrier would be a hurdle with a rope on top. Boxes or actual hurdles can lead to injury.
Med ball throws- Can be used by any experience level
- Consists of overhead throw, scoop toss, scoop throws, etc.
PART 1(B): Weight Training Experience LevelAs far as weight training exercises go, you won't really find anything fancy in this section. Instead, you'll find simple weight training exercises that transfer very well to single leg jumping, that is, they strengthen the muscles & movements involved in SLRVJ's. Although bilateral strength exercises are very important to single leg jumpers, the primary emphasis should be on improving strength using unilateral exercises.
Quick note about olympic lifts: Olympic lifts (snatch, clean & jerk) and their assistance lifts (power clean, power snatch, hang clean, hang snatch) can be very effective at improving explosive strength. However, it is not something I recommend, because these lifts usually need quite a bit of coaching. It is rare to find people who are self taught in the oly's (olympic lifts) who have proper technique. Performing oly's with crap form is just a waste of time, their are safer & more effective alternatives. If you are proficient with oly's, feel free to add them to the list of exercises in the PRIMARY ASSISTANCE category.
Strength Exercises: Beginner
MAIN EXERCISES:
- DB Walking Lunges
- DB 18" Stepups
PRIMARY ASSISTANCE EXERCISES:
SECONDARY ASSISTANCE EXERCISES:
- Single & Double leg glute bridges
- Reverse hypers
- Peterson stepups
- Calf raises
Strength Exercises: Intermediate
MAIN EXERCISES:
- BB/DB Walking Lunges
- BB Squat
- DB 18" Stepups
PRIMARY ASSISTANCE EXERCISES:
- DB 24" Stepups
- GHR Bench or Poor Man's GHR's
- REA Squat
SECONDARY ASSISTANCE EXERCISES:
- SL elevated glute bridges
- Calf raises
Strength Exercises: Advanced
MAIN EXERCISES:
- BB Walking Lunges
- BB 1/2 - 1/4 Squat
- BB 12" Stepups
ASSISTANCE EXERCISES:
- ANYTHING FROM INTERMEDIATE/BEGINNER ASSISTANCE
General Upperbody Exercises:
- This can either be extensive or very minimal. At the very least, a few bodyweight exercises should be performed, adding weight, sets, or reps as you progress. Listed below are two types of exercises: push & pull. Using just these exercises, significant strength can be gained without the need for more advanced dumbell and barbell exercises. The only requirement is that, eventually intensity be added to the bodyweight exercises.
- Variations of pullups and Chinups
- Variations of pushups and dips
PART 1(C): SLRVJ TechniqueI rarely teach form on VJ, SLRVJ, or DLRVJ. Instead, I believe that improving strength will naturally improve form. Strength is improved by progressing the movement efficiency exercises & the weightlifting exercises. For example, one may coach you to change your SLRVJ form in a certain way. For the most part, in order for this new form to be utilized, a huge amount of sub-maximal reps must be performed. In the end, this new form may or may not result in improved performance. Consciously changing your form during a maximal SLRVJ is impossible, because for it to be a maximal attempt, there can't exist conscious interference in such a high speed movement. Instead, you want everything to be pre-programmed & reflexive.
Strengthening the correct muscle groups, strengthening positions, mastering new movements, and continuing to jump maximally will lead to improved form. For example, improving strength may allow you to aggressively run up from a 5 step approach, as opposed to a 3 step approach. This new strength may also allow you to plant your leg further out, or further back. Regardless of what adaptations your body makes, they will be none other than positive if you progress the movement efficiency exercises & strength exercises.
I'll use eddie as an example. Some High Jump coaches may advise him to plant his foot further back. When eddie first started training, his foot did plant further back. As he got stronger, his best jumps came when he planted his leg way out in front of his body. His body just adjusted, and thus was able to handle a new and improved position that resulted to inches gained on his SLRVJ. The only thing that was conscious, was aggressively accelerating into the run up and powerful armswing, but these were cues we used pre-jump.
Below are 3 jumps from eddie. Click the thumbnails underneath the pictures to see how long his lead-in step is, where he plants his foot, etc. By no means try and consciously change your form. Eddie improved his strength immensely, through consistent hard work. The slight changes in his SLRVJ happened naturally as a result of increased strength.
PART 2: EXERCISESBelow are some links to the exercises listed. Some are not listed, because I have deleted some of my old footage. I'll try to get everything linked eventually. I can't be arsed listing out the "rep ranges" for each exercise, because they depend on the block, athlete, goal, etc. To spare my sanity, if you have a question about an exercise, post it.
MOVEMENT EFFICIENCY EXERCISES
STRENGTH EXERCISES
Strength exercises for ADVANCED
-
- MAIN EXERCISES
- BB Walking Lunge
- BB Half Squat OR BB Quarter Squat
- BB 12 inch Stepup
-
- ASSISTANCE EXERCISES
- ANYTHING FROM INTERMEDIATE/BEGINNER ASSISTANCE
PART 3: TRAININGOrganizing TrainingThere's a few ways I like to organize training for SLRVJ:
Emphasis on primary movement efficiency exercise WITH strength training:- Warmup
- movement efficiency exercise: PRIMARY MAIN: 1 exercise: Build up into max effort SLRVJ's until drop off
- OPTIONAL: med ball throws
- movement efficiency exercise: PRIMARY ASSISTANCE: 1 exercise
- movement efficiency exercise: ANKLE ASSISTANCE: 1 exercise
- max strength exercise: MAIN: 1 exercise
- assistance exercise: PRIMARY ASSISTANCE: 1 exercise
- assistance exercise: SECONDARY ASSISTANCE: 1-3 exercises, done quickly
- Core
Emphasis on secondary movement efficiency exercise WITH strength training:- Warmup
- movement efficiency exercise: SECONDARY MAIN: 1 exercises: bounds / skips
- OPTIONAL: med ball throws
- movement efficiency exercise: PRIMARY ASSISTANCE: 1 exercise
- movement efficiency exercise: ANKLE ASSISTANCE: 1 exercise
- max strength exercise: MAIN: 1 exercise
- assistance exercise: PRIMARY ASSISTANCE: 1 exercise
- assistance exercise: SECONDARY ASSISTANCE: 1-3 exercises, done quickly
- Core
Emphasis on strength training WITH (primary or secondary) movement efficiency exercise:- Warmup
- OPTIONAL: med ball throws
- movement efficiency exercise: PRIMARY MAIN OR SECONDARY MAIN: 1 exercise: SLRVJ's or bounds / skips
- movement efficiency exercise: ANKLE ASSISTANCE: 1 exercise
- max strength exercise: MAIN: 1-2 exercise
- assistance exercise: PRIMARY ASSISTANCE: 1-2 exercise
- assistance exercise: SECONDARY ASSISTANCE: 1-3 exercises, done quickly
- Core
Emphasis on movement efficiency exercises:- Warmup
- movement efficiency exercise: PRIMARY MAIN OR SECONDARY MAIN: 1 exercise: SLRVJ's or bounds / skips
- movement efficiency exercise: PRIMARY ASSISTANCE: 1 exercise
- movement efficiency exercise: ANKLE ASSISTANCE: 1 exercise
- OPTIONAL: med ball throws
- OPTIONAL: core
Emphasis on Next-session STIM (advanced weight training experience):- Warmup
- movement efficiency exercise: PRIMARY MAIN OR SECONDARY MAIN: 1 exercise: SLRVJ's or bounds / skips
- max strength exercise: MAIN: USING MSEM APPROACH: 1 exercise
- OPTIONAL: med ball throws
- OPTIONAL: core
Emphasis on Per-session STIM (advanced weight training experience):- Warmup
- movement efficiency exercise: PRIMARY MAIN: 1 exercise: SLRVJ's
- STIM COMPLEX (described below)
- OPTIONAL: core
The focus of trainingSince the concepts of my
Progressive Overload blog entry apply here, I won't go into too much detail.
Training for SLRVJ should be split up into 2 phases:
- Building work capacity
- Peaking
In the first phase, work capacity is built. This requires exposing the body to progressively higher volumes of training. These phases should be performed in the off-season, where skill work can suffer from the fatigue caused by this phase. Though skill work may suffer, it would not be a good idea to neglect it. Doing so will make transitioning into peaking much less effective.
Finally, a peaking phase is performed. Volume is gradually reduced, while intensity progressively increases. Here, frequency of training becomes important. Whether frequency is increased or decreased depends on the athlete, but the goal of doing so remains the same: To enhance CNS stimulation, reduce fatigue, perform jumps & plyos at the highest level, increase maximal strength, and increase explosive strength.
Training BlocksHere are a few scenarios based on weightlifting experience:
Beginner Weight Training:
- Acquisition phase: 8 weeks, 3-4 sets of 8-12 reps, ~2-3 sessions per week
- Strength phase: 4 weeks, 3 sets of 6 reps, ~2-3 sessions per week
- Power phase: 4 weeks, 2 sets of 6 reps, ~1-2 sessions per week
Intermediate / Advanced Weight Training:
- Building work capacity phase: 4-8 weeks, 3-4 sets of 8-12 reps, ~3 sessions per week
- Strength phase: 4-8 weeks, 3-4 sets of 5 reps, ~2-3 sessions per week
- Power phase: 4 weeks, 3-4 sets of 1-3 reps, ~2-3 sessions per week
Intermediate / Advanced Weight Training, Using
ratios:
[hypertrophy:strength:MSEM] x N-ROTATIONS- Building work capacity phase: [3:1:1] x 3
- Transition: [2:1:1] x 3
- Neutral: [1:1:1] x 2
- Power block: [1:2:1] x 3
- Peaking: [0:1:3] x 2
I'm not going to go into much more detail on program structure, because honestly, there's too many factors to take into account, such as work schedule, recovery, stressors, sports, etc. These were just some general examples.
Mixing double & single leg jumpingWhen it comes to the movement efficiency portion of the SLRVJ workout, it's not a good idea to perform intense double leg jumps prior to max effort SLRVJ's. For example, in a SLRVJ session, preceding SLRVJ's with double leg RVJ's, double leg bounds, or double leg depth jumps can cause the SLRVJ's to suffer - the CNS can go haywire.
If the emphasis is on single leg RVJ's (PRIMARY) or bound variations (SECONDARY):
- Don't precede SLRVJ training with max effort double leg movements (jumps or plyometrics)
If the emphasis is on double leg RVJ' (DLRVJ's):
- Don't precede DLRVJ training with max effort SLRVJ's.
- Variations of single leg bounding can be performed prior to DLRVJ's.
If the emphasis is on sprinting:
- Sprinting, but not to dropoff, can precede SLRVJ training
Templates for combined DLRVJ/SLRVJ training will be given in part 4.
STIM for Intermediate & Advanced AthletesDuring a peaking block, one of the best ways to improve SLRVJ (or any VJ/RVJ for that matter), is to make use of STIM methods. Since SLRVJ can shut down very quickly in the face of fatigue, it is best to manage fatigue properly during a peaking block. See ratio & progressive overload blog entries.
STIM can be achieved in a few ways:
- Per session: Trying to stimulate performance within the current session
- Next session: Trying to stimulate performance for the next session
[html]
[b]STIM: Per session[/b]
Here, we utilize a heavy INITIAL exercise, followed by rest, then perform a explosive/ballistic SUBSEQUENT exercise. The SUBSEQUENT exercise should be a SECONDARY-movement-efficiency-exercise (bounds etc). Optionally, other assistance exercises could be used for the subsequent exercise. The heavy exercise, followed by adequate rest, is used to enhance performance and adaptation of the second exercise.
A Few examples:
REA followed by bounds: This is one complex, perform 1-3 complexes based on advanced-experience level.
[*]REA squat: 50-70% 1RM: 2 x 3, 2-3 minutes rest between sets
[*]Bounds: 2-3 x 6-8 (total contacts), rest 4 minutes between sets
[*]rest 6-8 minutes
[*]optional: repeat for next rotation of the complex
[html]
Heavy Squat, Lunge, Or 12" stepup followed by Overloaded bounds or weighted quick lunges: This is one complex, perform 1-3 complexes based on advanced-experience level.
- Heavy squat, lunge, or 12" stepup: 80-90% 1RM, 2 x 2-3 reps (total for DL, each for SL), 3-5 minutes rest between sets
- Overloaded (vested) bounds or weighted quick lunges: 2-3 x 8-12 (total contacts), 3-5 minutes rest between sets
- rest 6-10 minutes
- optional: repeat for next rotation of the complex
STIM: Next sessionHere, we utilize a heavy lifting session to potentiate or ramp up the CNS for the next session. The best way to do this is to utilize MSEM protocols, using either squat, 12" stepup, or walking lunges as the exercise. All exercises would be done for heavy singles, with very low volume:
- MSEM-style full, half, or quarter squat: 2-3 x 2-4 reps, rest between reps
- MSEM-style 12 inch stepups: 2-3 x 2-3 reps each leg, rest between reps after both legs have performed a stepup, penultimate leg first.
- MSEM-style walking lunges: 2-3 x 2-3 reps each leg, rest between reps after both legs have performed a stepup, penultimate leg first.
Body CompositionA low body fat percentage will ensure the highest possible SLRVJ that is possible based on your current strength levels. When an when-not to focus on body composition is important.
Overweight individuals- Getting down to an athletic body fat of at least 12% should be a priority
Athletic individuals- GPP/BWC Phases: A general concern about maintaining an athletic body composition.
- GPP/BWC Phases: Drastic dietary alterations should be avoided, considering the volume during these blocks.
- Don't try and reduce body fat in conjunction with a high volume block.
- Since body composition is kept within reasonable levels, reducing bodyfat should happen gradually during a peaking period. Again, nothing drastic. It is essential that strength does not drop while decreasing bodyfat if peaking SLRVJ is the priority.
CoreCore is very important and should not be neglected. I like to split core up into two parts:
Stabilization is the most important, considering it helps to improve pelvis stability. Weak links in pelvis stability can manifest themselves at the ankle, knee, and hip during SLRVJ's. If any of these weak links exist, SLRVJ will suffer. I prefer to do these for 30-60 seconds. Any longer than 60 seconds is pointless, in my humble-awesome opinion (IMHAO). So once you achieve a level of 45-60 seconds with proper form, you can consider adding weight. Athletes develop insane pelvic stability when they can front pillar 3+ plates with proper form & ab control, as well as single leg side pillar with 1+ plate.
Stabilization exercises- Front pillar
- Side pillar
- Single leg side pillar
Core Circuits: Can consist of any of the following- Unsupported situps
- Situps
- Dead bug crunches
- V-ups
- Hanging or supine leg lifts
- Prone cobra
- Prone superman
- Bicycle crunches
- Rollouts
- Physioball jack knifes
- Brucee Lee's
- Hanging or supine knee ups
- Other good stuff
I prefer to pick 4-5 exercises, and perform them for ~30 seconds, in a nearly non-stop rotation. Possibly 10 seconds rest between each exercise, or no rest at all. Following each rotation, ~1 minute rest. Perform 2-4 rotations.
FlexibilityGoing to keep this part very simple. Static stretching prior to explosive/ballistic/strength sessions can reduce performance.
Guidelines for flexibility- DO NOT STATIC STRETCH BEFORE ATHLETIC COMPETITION
- DO NOT STATIC STRETCH BEFORE MOVEMENT EFFICIENCY SESSIONS (skill / plyo)
- Static stretching prior to weight training can be beneficial, that's case dependent. If something "feels tight", stretch it. If you feel fine, don't. Stretching the "prime movers" is not a good idea.
- If you're starting to feel tight, stretch AFTER your sessions.
- If you like stretching, stretch AFTER your sessions.
- Pre-session warmups should include dynamic mobility.
Takeoff AngleFor SLRVJ's, a takeoff angle of 60+ degrees is needed. Failure to achieve this optimal angle is a result of insufficient quadriceps strength. Following the guidelines in this article will fix these issues.
60 degree angle for visual reference:GUESS WHO IS GOING TO SLEEP. ME.
-- adarqui